Mechatronics & Automation Engineer | alfanar Precast
alfanar · الرياض
نُشرت: · آخر موعد:
alfanar
التقديم مجاني ومن رابط الإعلان. فُرصارا ليست جهة توظيف، وقرار التوظيف بيد صاحب العمل.
قدّم من رابط الإعلانمتطلبات الوظيفة
- مؤهلدرجة البكالوريوس في هندسة الأتمتة أو مجال ذي صلة
- خبرةخبرة من سنتين إلى خمس سنوات في الأتمتة أو الميكاترونكس أو الروبوتات أو البحث والتطوير
- مهارةتصميم الأنظمة الميكاترونية وتكامل الأنظمة متعددة التخصصات وأتمتة العمليات
- مهارةالمخططات الكهربائية ولوحات التحكم وبرمجة PLC والأنظمة المضمنة
- مهارةالتصميم الميكانيكي باستخدام CAD، والنمذجة ثلاثية الأبعاد، والرسومات ثنائية الأبعاد، ووثائق التصنيع وقوائم المواد (BOMs)
- مهارةأجهزة الاستشعار والأجهزة والقياس والمعايرة وأنظمة التحكم بالتغذية الراجعة
- مهارةبروتوكولات الاتصال الصناعية، والنماذج الأولية، واختبار الأنظمة والتحقق من صحتها وتشغيلها
- مهارة · مفضّلبرمجة الروبوتات الصناعية والتعاونية ومحاكاتها ودمجها، وتخطيط الحركة الروبوتية والرؤية الآلية وتحديد المواقع المعتمد على أجهزة الاستشعار
- مهارة · مفضّلتطوير البرامج الثابتة المضمنة، وتصميم الدوائر الإلكترونية وتطوير واختبار PCB، وتطوير HMI/GUI ودمج APIs والبرمجيات وإدارة البيانات
- متطلبحل المشكلات
اعرف مدى توافق سيرتك مع هذه الوظيفة، ثم قدّم عليها.
قارن سيرتي بالوظيفةلديك حساب؟ سجّل الدخول
نص الإعلان الأصلي
.
Job Purpose
Design, develop, integrate, and validate advanced mechatronic, robotic, and automated systems, including construction automation solutions, within a multidisciplinary R&D environment. The role combines mechanical, electrical, electronic, embedded systems, control systems , and software engineering to deliver innovative, reliable, and cost-effective solutions throughout the development lifecycle, from requirements definition and system design through component selection, prototyping, testing, commissioning, and continuous improvement, while ensuring compliance with performance, reliability, safety, and cost requirements.
Functional Responsibilities
System Design & Integration
Translate operational requirements into technical specifications and system architectures.
Integrate mechanical, electrical, electronic, embedded, control, and software subsystems.
Conduct engineering calculations, feasibility studies, design reviews, and risk assessments.
Optimize performance, reliability, safety, manufacturability, and cost.
Mechanical Engineering
Develop mechanical concepts, mechanisms, assemblies, and structural interfaces.
Prepare 3D models, 2D manufacturing drawings, and bills of materials (BOMs).
Evaluate component strength, alignment, vibration, installation, and maintenance.
Coordinate with fabrication and assembly teams.
Electrical & Control Engineering
Develop electrical schematics, wiring diagrams, control-panel layouts, and system interfaces.
Calculate electrical loads and select components, protection devices, and grounding arrangements.
Develop and troubleshoot PLC programs, control sequences, interlocks, and alarms.
Robotics & Embedded Systems
Program, configure, calibrate, and integrate industrial and collaborative robots.
Develop robot motion paths, coordinated control, and sensor-based operations.
Integrate embedded firmware, electronic circuits, hardware interfaces, and PCB systems.
Sensor & Software Integration
Select and calibrate sensors, instrumentation, and feedback systems.
Integrate HMI/GUI applications, APIs, data logging, diagnostics, and automated controls.
Troubleshoot software, hardware, and communication interfaces.
Supplier Coordination
Prepare technical specifications and evaluate suppliers, components, and quotations.
Assess compatibility, performance, cost, and compliance with project requirements.
Coordinate with procurement and suppliers to resolve technical issues.
Testing & Commissioning
Assemble, configure, test, and commission prototypes and automated systems.
Execute test plans to verify functionality, accuracy, performance, reliability, and safety.
Investigate failures, implement corrective actions, and support acceptance testing.
Technical Documentation & Delivery
Maintain engineering drawings, specifications, calculations, test records, and BOMs.
Prepare operating instructions, maintenance procedures, and technical reports.
Track deliverables, manage engineering changes, and support project schedules and manufacturing deployment.
General Responsibilities
Professional Development
Continuously enhance technical knowledge, engineering competencies, and professional skills.
Participate in training, technical reviews, and knowledge-sharing activities.
Delivery & Resource Management
Complete assigned tasks within agreed schedules, budgets, and quality requirements.
Utilize resources efficiently, monitor progress, and report deviations or support requirements.
Problem-Solving & Accountability
Take ownership of assigned tasks and proactively address technical and operational challenges.
Escalate risks affecting safety, quality, cost, or project delivery.
Quality & Continuous Improvement
Ensure compliance with approved specifications, procedures, and quality standards.
Identify opportunities to improve efficiency, reduce rework, and optimize engineering processes.
Collaboration & Compliance
Collaborate with multidisciplinary engineering, project management, procurement, production, quality, and operations teams.
Comply with company policies, document-control procedures, confidentiality requirements, and intellectual property protection.
Health, Safety & Environment (HSE)
Apply applicable HSE requirements during design, assembly, testing, and commissioning.
Identify and report hazards, follow safe working practices, and maintain an organized work environment.
Technical Skills
Core Skills
- Mechatronic system design and multidisciplinary integration.
- Engineering calculations, component sizing, and technical specifications.
- Mechanical CAD, 3D modeling, 2D drawings, and manufacturing documentation.
- Electrical schematics, control panels, PLC programming, and embedded systems.
- Sensors, instrumentation, calibration, and feedback control.
- Industrial communication protocols and hardware–software integration.
- Prototyping, system testing, validation, and commissioning.
- Technical documentation, BOMs, supplier evaluation, and component sourcing.
- Troubleshooting, root-cause analysis, and engineering change management.
Preferred Specialist Skills
- Industrial and collaborative robot programming, simulation, and integration.
- Robotic motion planning, calibration, and coordinated control.
- Mobile robotics, machine vision, and sensor-based positioning.
- Embedded firmware development and real-time control.
- Electronic circuit design, PCB development, and testing.
- Automated process control and performance monitoring.
- HMI/GUI development, APIs, software integration, and data management.
Qualification
Bachelor in Automation Engineering or Any relevant field
Experience
2 to 5 years of relevant experience in automation, mechatronics, robotics, or R&D
Skills
System Design
Systems Integration
Process Automation
Problem Solving
وظائف مشابهة في الرياض
Mechatronics Technician
شركة زهران للصيانه والتشغيل · الرياض · دوام كامل
Mechatronics & Automation Engineer | alfanar Precast (Riyadh, Saudi Arabia)
alfanar · الرياض
Mechatronics Technician
شركة مركز تميزالانشاءات للاستشارات الهندسية شركة شخص واحد · الرياض · دوام كامل
Civil Engineer
شركة إم إيه بي كونسولت للاستشارات الهندسية · الرياض · دوام كامل
Accountant
شركة برافو للمقاولات · الرياض · دوام كامل